MTI CORPORATION, USA
|
Zero Diffraction Plate with Cavity for XRD: 30 Dia x1.0 t mm w/ Cavity 20mm IDx0.5 mm, Si Crystal
❮
❯
|
- Crystal: Si, P-type B-doped
- Resistivity:10-15 ohm.cm
- Size: 30 mm diameter x 1.0 mm Thickness,with a
cavity in the center of the plate with 20mm dia. and 0.5 mm depth
- Zero diffraction plate is made of Silicon cut at special orientation
- Perfect for sample holder of powder XRD, which has no background noise from 20 to 120 degree (2θ angle Cu Ka X-Ray)
- Fit with XRD of Siemens, Scintag, Rugaku and many more.
Warning: X-ray beam shall be 5 mm dia or less and hit in the center of sample
when you use cavity zero diffraction plate . Otherwise the edge may result in a peak
- Typical XRD of Si zero plate
×
![]()
|
|
|
|
